Sep 29, 2018 8:55 pm
Perpends not filled in the inside face wall.
Not enough mortar bed in some areas.
Outside wall looks ok.
Are these brickworks within the todays industry standard practises?
Do I have a case against the builder?
Building with project home builder in Sydney.
Re: Voids in mortar joint2
Sep 30, 2018 10:27 am
Welcome to the forum
If you don't have your engineering Drawings I suggest you get a copy of them, refer to the Masonry section in the Engineering notes.Check building location for Mortar classification ie Coastal -> M4 etc, etc
Generally the vertical perpends are filled, basically you will need an Engineer to check it against AS3700 Masonry codes for compliance. Good luck
Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs
https://plus.google.com/u/3/communities ... 1476023758
Sign in or Join to reply to this Topic
tweety123Appreciate your comments on the quality of this brickwork (pAppreciate your comments on the quality of this brickwork (p
That makes sense. Thank you for the advice.