Browse Forums General Discussion 1 Sep 06, 2018 3:44 pm Aluminium and timber windows and doors - Standard sizes at wholesale prices! http://www.windowsanddoorssydney.com.au Castle Hill Showroom 02 9634 2002 Alexandria Showroom 02 9667 0002 Re: Design Ideas for uPVC Windows and Doors 4Sep 28, 2018 11:29 pm Apparently its widely used in US, Europe and more importantly middle east - which should be a testament for surviving the extreme heat. I am currently considering Koemmerling uPVC profile from a local supplier and as per them, UAE is a major consumer for uPVC. https://www.koemmerling.com/en/contact/sales-locations/ However, they do admit darker colors and timber textured uPVCs will fade over time (20-30 years maybe) - but so does the darker colored aluminum. Apparently, the darker color aluminum powder coating may be fading faster than uPVC dark color laminates. Unfortunately, I don't have much to substantiate most of my above opinions, hoping someone else could rule this in or out with some proof! there ends my 2c. Cheers Depends... Brick veneer required the window to be attached to the house frame, this is usually achieved by screwing through the timber reveal into the frame. There are… 1 4611 Hi Simeon, Thanks for your reply. Yes, that makes sense. I contacted the manufacturer; they will issue a certificate with BAL rating mentioned on it. 2 1846 Flashings over doorways and windows our carpenter has installed flashings that is buckled and short of the window frames and door frames is this right Is there a… 0 1152 |