Building A New House
May 31, 2018 8:43 pm
I am wondering if anyone can assist me with a question. We are building a new house and have just had the frame stage passed by the Building companies selected building inspector.
Part of our build is to have a laundry chute from the upstairs to the ground floor laundry.
Currently the floor joist runs straight through the middle of the chute opening. The floor joist has a stamp on the wood saying not to cut the flange. In speaking to the building supervisor he mentioned that you can cut them they just have to go back to the manufacturer to find out how they want it supported if they do.
As the frame has been inspected and approved, and they haven't yet cut the floor joist, is that o.k? The frame was approved as is. If they change it after the inspection are they allowed to do this?
Being a first time builder I have a lot of questions and things I don't know.
Re: Can you cut the floor joists, after the frame inspection2
May 31, 2018 10:55 pm
Without seeing it's hard to say
If the all the joists span right across the building, and an additional support is provided either side of the chute it will probably be OK
It;s really up the building surveyor and/or structural engineer to sign off on the cut.
The Harder You Try - the Luckier You Get !
Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house.
Sign in or Join to reply to this Topic
MyFirstCan Pyrda strap under floor joists cause clanging sound?Can Pyrda strap under floor joists cause clanging sound?
Hi Please see below topic viewtopic.php?f=31&t=95315&p=1844002#p1844002 Thanks
MyFirstCan Pryda strap underside joists cause metal clanging sound?Can Pryda strap underside joists cause metal clanging sound?
Yes speed bracing where it has a bolt in the middle of the X. On my engineering drawing it's says pyrda strap. Lucky is isolated to the master br. Where the small…