Browse Forums Building A New House Re: Building with Metricon 6547Nov 05, 2017 7:42 pm Our Bayside KDR Thread: viewtopic.php?f=31&t=78298 Re: Building with Metricon 6548Nov 05, 2017 11:33 pm Cheers Nom Newhaven 36 by M Blog - North Shore Newhaven (http://nsnewhaven.blogspot.com.au) Build - https://forum.homeone.com.au/viewtopic.php?f=31&t=85092 Re: Building with Metricon 6549Nov 05, 2017 11:39 pm Cheers Nom Newhaven 36 by M Blog - North Shore Newhaven (http://nsnewhaven.blogspot.com.au) Build - https://forum.homeone.com.au/viewtopic.php?f=31&t=85092 Re: Building with Metricon 6557Nov 06, 2017 2:11 pm Question for wardrobes, I have notice in the plans that the width of a wardrobe is 500. I had robes put in my home and the width is 620. I thought a standard robe has draws for 600. Did anyone change there depth of robs? Re: Building with Metricon 6558Nov 06, 2017 2:23 pm PVBuild There's a difference between inspector and surveyor, what Metricon want you to use is their surveyor (certifier). We're using Metricon's surveyor as it just makes things easier with going through council etc, but have our own private inspections. Expect to pay around $2,500 in total for an inspection at every invoice stage. Re: Building with Metricon 6559Nov 06, 2017 2:28 pm PVBuild excited_builders Drew01 Irrespective of who does your demolition, make sure in Melbourne you hire the temporary fencing from AIM Hire, as they are who Metricon use, and they take on the hire after the first 6 months until the end of the build Thanks Drew so did not know we had to hire the fencing...thought that was taken care of by demolition co n metricon.... Our temp fencing was taken care of by the demo crew and Metricon. 2 different sets, included in the pricing. We used Apollo Demolition in Metro Melbourne. They were very good and did it in 2 days, with asbestos clearance certificates. Our sales consultant at Metricon recommended them. Thanks Re: Building with Metricon 6560Nov 06, 2017 2:34 pm Vet Question for wardrobes, I have notice in the plans that the width of a wardrobe is 500. I had robes put in my home and the width is 620. I thought a standard robe has draws for 600. Did anyone change there depth of robs? I requested to have 600mm in the WIR. No charge from M. Hi, First of all, thank you to this community for sharing your thoughts and opinions. We are in early days of our pre-contract stage for Metricon Doulton and we are… 0 11574 Hello All 🙂 We are planning to start our journey of construction our first home. We zeroed down on Metricon and henley homes based on design suitable for our lot and… 0 8965 We don’t live in VIC so want to know the exterior colours of Lumiere display so we can see it at the paint shop. Not building with Metricon so my request went… 0 19050 |