Browse Forums Owner Builder Forum 1 Jul 09, 2017 8:51 am Hi All, Just about to start on my owner builder in the Illawarra. Private certifier has requested a Section 138 road opening permit. Just wandering what is the purpose, cost and what is the best way to go about it. The road gutter is rounded not stepped. Thanks Re: Section 138 Road Opening Permit to be obtained from Coun 2Jul 11, 2017 11:00 am Hi NSU. https://epathway.wollongong.nsw.gov.au/ ... =128760676 cost appears to be $255. Council makes sure it complies with their standards, like angle of entry ramp. Coverforce Allrisk Owner-Builder Insurance Experts http://allrisk.com.au/owner-builder-insurance-quote/referrer/HomeOne I brought terry road box hill in June 2022 House was meant to be completed Nov 2023 That did not happen I had to chase them so much to the land Registration and… 0 2980 You wont need a permit to put in non loading partition but you will need a licensed plumber and a licensed electrician 1 6823 I don’t think so as the floor area over 300 square meters then it is class 3…. 12 18329 |