Browse Forums Lighting + Lighting Design Re: LED and switches 2Jan 14, 2016 6:01 am Building Services Engineer Renovating our 1960's modernist home in Brisbane https://forum.homeone.com.au/viewtopic.php?f=53&t=82091 Re: LED and switches 8Jan 14, 2016 11:15 am Building Services Engineer Renovating our 1960's modernist home in Brisbane https://forum.homeone.com.au/viewtopic.php?f=53&t=82091 Re: LED and switches 9Jan 14, 2016 11:19 am Building Services Engineer Renovating our 1960's modernist home in Brisbane https://forum.homeone.com.au/viewtopic.php?f=53&t=82091 Re: LED and switches 11Jan 15, 2016 6:47 am One other tip along with the dimmer flicker device , we had all of ours plugged - not wired - in. If one goes you can just unplug and replace (under warranty). They may do this but some may try to wire them. It costs VERY little extra. I am planning to get shelly dimmers added to the non-smart switches that control light. It has no affect on the mechanical functioning of the switch and this is wired… 1 1422 I recently went through a similar renovation and move scenario when updating our family home. We also swapped some rooms around and tackled a major… 2 9755 |