I have finalised getting the power hooked up which should be on next week. Our brickie has broken his finger so the builders will be doing the bricking until he is good to go again. The bricks are very simple and the rep has been up to give a thorough run down and will be popping up periodically to ensure all is well.
Next up is lower floor bricks and stud framing! Stay tuned
STEEL: Steel is up and in place, a few very snowy days saw the whole block coated in snow and the road shut to get up there which delayed this getting completed. There are a few beams in the middle of the deck area (cantilever area) that need to be changed as they were hanging too low, which would impact the underside of the deck. Snow on site! Tassie just had its coldest winter in 50 years.
Next up: - Framing down stairs - remove supports from brick lintels - temp stairs to upper floor - redo support beams on deck - floor joists in - floor on
So very sorry for the lack of updates, life has been a bit crazy. I was moved up the north of the state for work.....yes I am serious. I have to be up here for minimum 2 years, so I will be travelling (2hrs) quite a bit during days off.
The house is nearly finished, but I will let the pictures to the talking.
If anyone has any questions about any stage/item/image you see, just let me know.
The tiler is in today finishing off the bathrooms.The plumber can then finish off.
We have had some issues with the kitchen benchtops. We have 700mm tops, not the standard 600mm. The joiner has quoted at 600mm and did not resend through an invoice after he came for a check measure. Its going to cost us a bit extra now ($3000!)
Howdy all. I am looking for feedback on what people would do to maximise and make an area as flat as possible. First, out the front of the house is a sloping hill, pretty…
I brought terry road box hill in June 2022
House was meant to be completed Nov 2023
That did not happen
I had to chase them so much to the land Registration and…
So it looks like we finally have some movement on site! Definitely later than expected, but I'll take any progress at this point.
I'll drop by over the weekend to get…