Browse Forums Building Standards; Getting It Right! Re: perpends and mortar on the inside face 21Jun 02, 2015 8:27 pm Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Re: perpends and mortar on the inside face 24Jun 12, 2015 9:21 pm Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs Re: perpends and mortar on the inside face 26Jun 13, 2015 7:06 am Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Re: perpends and mortar on the inside face 28Jun 14, 2015 10:49 am Quote: What you are seeing is example of one sided flick jointing. I've yet to see a brickie lay bricks other than flick jointing ( both sides ). I think the difference is in how much mud they apply to the external corners of the brick so when they tap the brick into place the mortar squeezes into the majority of the perpend space. Good result too dojrude! Stewie Recently I moved to a 30 year old house and found within few months there are small brown nests in the brick mortar and few small round holes in few places of brick… 0 22691 Hi, I am planning to select San Selmo reclaimed original for the fascade of my build. I have seen many photos on line of the brick varying from a rustic to a neat finish.… 0 4653 Building Standards; Getting It Right! Hi, sorry if this is the wrong place - I’m new to the property/building journey (trying to buy my first home) so not sure where/who to go with these sorts of… 0 19320 |