Browse Forums Interior Decorating Lounge Re: External colour help required please 9Nov 18, 2008 5:36 pm Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: External colour help required please 10Nov 18, 2008 8:19 pm Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: External colour help required please 17Nov 20, 2008 5:14 pm Tillie Thanks for you advice Michelle. I have tried to change some of the colours and would appreciate your opinion on the following: Roof tiles: Tudor style, Barramundi colour Gutter: Dune Fascia: Woodland grey Brick: Pearl grey, with off white mortar Windows: Either Paperbark or White birch (not too sure which one) Garage door: Woodland grey Front door: Woodland grey with sidelight frames in the woodland grey also Only a few more sleeps til colours need to be in, I cannot believe how difficult this has been Tillie I would think about ….. Roof tiles: Tudor style, Barramundi colour Gutter: Woodland grey Fascia: Dune Brick: Pearl grey, with off white mortar Windows: White birch Garage door: Woodland grey Front door: Woodland grey with sidelight frames in the woodland grey also OR……Black If the door doesn’t get any sun on it. Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: External colour help required please 18Nov 20, 2008 7:34 pm Thank you so very much to ALL of you
I am glad to see that I may have a "little" bit of colour sense, seeing that the colours that I chose were not too far off what has been suggested Thanks again to you all, as I am not so worried about Monday... Bring on the colour consultation... Tillie Re: External colour help required please 19Nov 20, 2008 8:08 pm Tillie Bring on the colour consultation... SEE…..we’re not so scary! Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Minimum overhang into gutter must be 50mm, turn down tool should not split the sheet. it seems wrong tool for the profile was used, the flashing cannot slope back. Rib… 2 2156 Thankyou so much 😀 I've decided on White on white for doors and trims, White on white 50% on ceiling and Mt buller for walls. Fingers crossed it will look OK 😀 2 7264 Thank you @. Tried to play with the facade models but the exact colour is not matching up. 2 3358 |