Browse Forums Heating, Cooling & Insulation Re: Adding a second Brivis Networker 11Nov 20, 2008 2:16 pm Sorry, I got my extra Networker with the install, so I don't know.
HC Re: Adding a second Brivis Networker 12Jan 13, 2009 2:37 pm The second networkwer is normally the slave is useful when you have 2 zones .When heating second zone only ie Bedrooms second controller is usally in the master room so it can turn unit off when at rerquire temp.With a single controller in the middle of house it takes a lot longer for temp to travel from rooms to main area resulting in bedrooms running up to 5-6 degrees hotter than set point.
Speak to Brivis they should sent out paper work to wire We were lucky in that our old house was so small (86 square metres) compared to the new house, they were able to take enough readings around the old backyard house before… 8 37162 Hi, We have a single story MacDonald Jones house, on a waffle pod slab with steel frame. Are we able to build a second story extension? Other info is we are 900mm from… 0 8505 We are building a second dwelling and are currently selecting window and door frames. We want to blend into the forest and also bring out the stone work and the fake wood… 0 15945 |