Browse Forums General Discussion Re: What to do with floor level 9Jan 16, 2015 6:13 pm I'm not putting t&g flooring on top, just carpet. I originally got the screed because I was getting rectified tiles, this is no longer but my builder won't give me a credit for what the screed is really worth so I thought bugger it leave it in. So I won't have to lay plastic or anything under the ply? And yes the slab does have a vapour barrier Re: What to do with floor level 10Jan 16, 2015 7:01 pm Not sure how the ply was fixed to our concrete slab but I do remember that our timber floorboards were glued and secret nailed to the plywood all on top of a moisture barrier. The ply under our carpet was not perfect at the joins, small gaps but with good underlay can't tell what the sub floor is now Re: What to do with floor level 11Jan 16, 2015 7:26 pm radiuz Not sure how the ply was fixed to our concrete slab but I do remember that our timber floorboards were glued and secret nailed to the plywood all on top of a moisture barrier. The ply under our carpet was not perfect at the joins, small gaps but with good underlay can't tell what the sub floor is now Interesting. I wasn't sure if just a butt join or yellow tongue is necessary for under carpet. isn't a garage level with the rest of the house a given? pretty sure they 'came around' long time ago. if you have a flat block, the garage is usually level with the rest… 1 18357 interesting situation what happened after builder issued final invoice? did you list as defect or not does the building surveyor have any responsibility? ie. issuing… 13 47667 |