Browse Forums DIY, Home Maintenance & Repair 1 Mar 27, 2014 8:28 pm a friend is having a house built the sliding door has been installed and brick work has started but when door is closed its not sitting level in frame is this fixed after brick are done and before gyprock is installed or is it just a small fix later by adjusting rollers on door ? Re: sliding door 2Mar 27, 2014 10:44 pm Hi Shane-Kelly, I would expect as you have suggested that this would be a minor adjustment later on. The door was just probably placed in quickly to get it in there and will be fine tuned later. I would happily stand corrected if anyone else has had a different experience. Cheers, Jenny. Need hints, tips and inspiration? Join me on my Facebook page: https://www.facebook.com/ournewhomecoach Who am I? See my LinkedIn page: http://www.linkedin.com/pub/jennifer-crawford/1a/429/296 I’m in a similar position except I’m after sliding 3 stacking doors. I am on a second-story apartment of which the balcony would not adequately fit any bi-fold or… 5 12162 DIY, Home Maintenance & Repair Thanks Chippy . Did also see a YouTube video before. Removed them . Thanks again for the advice. 2 11109 |