Browse Forums Flooring & Floor Covering Re: Floor Question 5Oct 07, 2008 9:51 am Rachelle It's all so confusing to me, to the point that I think we are actually just going to get the builder to lay tiles so that they are under the skirtings and architraves etc! I can totally relate.. my brain is overloading right now I think I was really naive about 'timber flooring' and wish I'd researched this 12 months ago, and not now when we might only have 8-10weeks left till handover I've just spoken to a Timberfloor company and now they say its best to lay hardwood floors on battens not plywood - and you will still need 40mm Just something else to confuse the situation. Bel, our builder has allowed 20mm because thats what we told them (our kitchen maker) but I'm hoping that if we go for the 40mm the only issue is trimming the kitchen kickboards and the issue with the dishwasher... Re: Floor Question 6Oct 07, 2008 10:37 am Snake haywgl Hope what I am about to say makes sense We will be getting our floors (carpet and timber floors) done after handover. We are building with PD and I already know they don't tack the skirting boards on for timber floors which is a bit anoying, but oh well ways around that I guess What I'm wondering though, is that I have read on other threads that people have had to get certain types of floors (floating instead of timber etc) because the builder had only left a certain amount of space for the floors after cabinetry, skirting boards etc were put on... Does anyone know how much space PD leave (20mm 40mm etc) and if I have to request to have it at a certain height, or would I be right in assuming I just leave it as their standard and I should have a fair range of flooring options to choose from post handover? Pretty much the standard floorboard height is around 10mm, if its 20mm or 40mm its a bit to high. Floating floor board that is. ha ha ha, I'm answering my own post, yep time to lie down. Re: Floor Question 8Oct 07, 2008 6:51 pm Yeah there is a 'sceret-nail' size designed specifically for 12mm overlay flooring over 12 mm ply. Re: Floor Question 10Oct 07, 2008 7:40 pm Hi Bel,
we are building with PD and asked to have 92mm skirting boards so that when we did the floating floor we would still have a "decent" skirting board showing. We laid the floating in our current place and that is the only gripe I have, that the skirting boards look weird with the floating timer edging tacked onto them. That's why I wanted bigger ones in this hosue Perhaps this maybe an option for you? We are building an Illoura 36 and it only cost about $600 to do this for the whole house (actually $400 net as we are having tiled skirts in the wet areas) Hope this helps Cheers Re: Floor Question 11Oct 07, 2008 8:31 pm Hi
I have just finished building with Henley and insisted that they leave the skirting boards off, which they did, as I was/did lay 19mm spotted gum over 12mm ply (looks awesome by the way). In the kitchen as I did not want ugly quading (sp.?) I extended all to plumbing and had the installers lift the island bench and lay the timber under it. Unfortunately the bench against the wall could not not be raised, not easily anyway, but the timber floor was laid within 10mm of the kick board. As the kick board is black I will fill this gap with a black filler. Unfortunately there was little I could do about the height difference with the floor boards and tiles but the carpet will be laid on 12mm ply . All in all I am stoked with how our house has come up and must say if you want timber flooring, get the real thing, you won't be disappointed. Regards Chrtis Re: Floor Question 12Oct 07, 2008 9:04 pm Thanks for your replies everyone
I might call PD just to find out what the height of it is and then call a few flooring companies and figure it all out Where did you source your spotted gum from Chris? I might also ask about leaving the skirting boards off but I've heard its a lost cause My karma ran over your dogma Re: Floor Question 13Oct 07, 2008 9:15 pm When enquiring about Spotted Gum, keep in mind there is NSW and Qld Spotted Gum - the Qld S.G. is much darker than the NSW stuff. Re: Floor Question 14Oct 07, 2008 9:20 pm The timber was supplied and laid by MYM in Keilor . It is feature grade 130 x 19mm and is finished with a Treatex oil, as previously posted, looks awesome. I filled all the features with a clear resin which I believe finished it off just perfect. My floor did cost a bomb, but it looks the bomb.
Regards Chris Re: Floor Question 18Oct 07, 2008 9:40 pm The timber alone would be around $45 sq. metre off the top of my head CDC Housing Code 3 When to apply Floor Area external face of wall vs Gross Floor Area internal face of wall. Reading thru CDC Housing Code 3, lets take a lot 915sqm.… 0 16563 isn't a garage level with the rest of the house a given? pretty sure they 'came around' long time ago. if you have a flat block, the garage is usually level with the rest… 1 17527 You can really use anything you want the main consideration would be how it looks once painted/finished - or the look you want. Cabinetmakers use MDF because its cheap… 2 9962 |