Browse Forums Building Standards; Getting It Right! Re: Brick weep holes not draining, HELP!!!!!! 9Jul 20, 2013 3:13 pm If you can't get water out you can stop getting it in Application of clear waterproofer will seal your wall and prevent or reduce absorption and won't change your brick appearance. Cheers Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Re: Brick weep holes not draining, HELP!!!!!! 10Jul 20, 2013 3:22 pm Thank you we are in the process of looking at different brick sealers. Some will change the look of the bricks which I really don't want. So looking for a more natural looking one. Suggestions are very welcome. Re: Brick weep holes not draining, HELP!!!!!! 11Jul 20, 2013 3:33 pm Have a look at Shelleys (i think or maybe Sheldon) in Bunnings Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog it depends on the natural ground level, if they excavated their boundary wall needed to be built as a retaining wall. If you filled, which sounds like the case then you… 1 7144 I know foam has been around since the 90's and CSR started manufacturing Hebel in 1989, so it's definitely possible 5 5496 You are correct. Just read through all the ncc rules and 75mm is the minimum requirement for me. 4 11207 |