Browse Forums General Discussion 1 Jul 18, 2013 1:57 pm My bathroom is on the opposite side of the house from the HWS. It takes time and a waste of water before hot water reaches the taps. I am now planning an en-suite even further from the HWS. What is the best and most cost effective way to minimise this delay and water loss? Re: Water heating for remote bathrooms 2Jul 18, 2013 2:06 pm What type of HWS have you got currently? If you have gas intantaniuous, you can get something like the Rianni SmartStart http://www.buildingproductsonline.com.a ... 897&type=M Re: Water heating for remote bathrooms 3Jul 18, 2013 5:14 pm Thanks for that. Current HWS is an Aquamax gas. I had a look at Rinnai, and it seems to require a ring main involving new separate pipework back to the Aquamax (costly). I was hoping that there might be some sort of thermo controlled electric booster to heat up the first few minutes of water flow. Does anyone have a suggestion for a good hydronic in slab heating speacialist who may be able to help me with an existing system and wether or not it may need a seperator… 0 4889 4 10824 This certainly doesn't look good. I would be engaging with an independent inspector to have a look at this. As for the unscheduled site visits, most builders are quite… 1 28326 |