Browse Forums Lighting + Lighting Design Re: Strip lighting 7Jan 08, 2014 7:46 pm Kind Regards, Kristin Lighting Expert Phone -1300 798 220 Email - service@golights.com.au Website - http://www.golights.com.au Re: Strip lighting 8Jan 08, 2014 8:29 pm My Building Thread:https://forum.homeone.com.au/viewtopic.php?f=31&t=66153 Re: Strip lighting 9Jan 09, 2014 10:25 am Yes, so essentially that would be the same thing. The load cable is the cable running from the Light switch to the power point. The LED driver is plugged into the power point, and therefore perfectly fine to do. Kind Regards, Kristin Lighting Expert Phone -1300 798 220 Email - service@golights.com.au Website - http://www.golights.com.au Hi everyone, Just wondering if anyone has switched from a small square tile insert or normal square waste to a strip drain at all, and if so did the plumber or diy-er… 0 11479 Building Standards; Getting It Right! 1. optional, you can but normally just use the earth from the main switch board 2. should be enough but the distance determines voltage drop - sparky should work it… 1 22075 |