Browse Forums Lighting + Lighting Design Re: false shelving??? 10Oct 15, 2008 7:44 pm cassius Exactly the topic I was chasing - post handover our sparkie installed 3 x under cabinet lights - I now need to install some type of cover/false bottom over the wiring in the cabinet - any hints? Sounds like what I mentioned earlier in this thread... If you get a piece of melamine shelving (or whatever material your cupboards/shelves are made of) as if you were to put in another shelf, and using a router (you may need the services of a handyman) cut the groove for the cabling (I'm assuming from near the middle of the shelf, and along to the rear of the cupboard?). Your situation might differ from how I have imagined it, so a photo would be helpful in solving your problem. The photo example ewan posted earlier in the thread looks like the compact fluro style globes, which as far as I know, are not slimline (ie: they'll stick out as much, if not more than, a normal 50W halogen globe), and you'll lose quite alot of cupboard space to accomodate them. I tried many links that came up in a google search and still can't find the example I'm thinking of... Building Standards; Getting It Right! 1. optional, you can but normally just use the earth from the main switch board 2. should be enough but the distance determines voltage drop - sparky should work it… 1 28820 I have a really long hallway which is 1100mm W x 11500mm L I would appreciate if anyone can give suggestions to light it up with Linear LED lights that goes from wall to… 0 8822 |