Browse Forums Lighting + Lighting Design 1 Jan 28, 2008 12:22 pm similar to the external lighting post...
We are planing on putting the fittings on our external lights following handover as we are not sure yet what we want. Which would be the best option for this arrangement? 1. have a battern light mounted on the external walls, or 2. have a junction box monuted on the wall (both with switches linked up inside) Thanks On the road to building our 1st home Re: outdoor lighting 2Jan 28, 2008 5:44 pm depends on if you actually will do them or if you might be distracted with another task.
If you might get distracted - do the baton fittings - then you have lights at least - versus - a junction box - then a baton - then the lgith you really desire. Steve Re: outdoor lighting 3Jan 28, 2008 8:10 pm excellent, that is what we thought we would do.
I just wanted to make sure that having the batten light would not cause problems with installing a different light fitting in the future thanks alot On the road to building our 1st home Building Standards; Getting It Right! 1. optional, you can but normally just use the earth from the main switch board 2. should be enough but the distance determines voltage drop - sparky should work it… 1 28821 I have a really long hallway which is 1100mm W x 11500mm L I would appreciate if anyone can give suggestions to light it up with Linear LED lights that goes from wall to… 0 8824 What? It's a lighting question, the control joint is only needed at 12m centres, a bulkhead or change of direction will suffice as a 'break' in the ceiling, just make… 8 8588 |