Browse Forums Lighting + Lighting Design Re: Help me light the void!! 2Aug 18, 2011 2:34 pm For info on our build: viewtopic.php?f=31&t=43093 Built the McLaren by Dechellis - slab down 22 Feb - handover 30 Aug 2011 - and gardens finished 9 Dec 2012!! Re: Help me light the void!! 3Aug 18, 2011 2:40 pm Newtown rebuild: https://forum.homeone.com.au/viewtopic.php?f=53&t=48977 Help me light the void!! 6Aug 18, 2011 5:30 pm Although our void is quite a bit smaller than yours, we are using a mix of LED wall lights and a Pendant/Suspension, switched separately. 6x LED Wall lights DSW111 with cool white globes mounted about 1800mm above floor height. http://www.cklighting.com.au/index.php?Product/index/id/42 Pendant/Suspension light http://www.mattblatt.com.au/Pendants/Replica-De-Lucchi-and-Ubens-Castore-Suspension-Light.aspx?p2979c4 Other suppliers where I have purchased some of our lighting from are: http://www.astrolighting.co.uk/ they do have a supplier in Melbourne. Ecc.com.au http://aboutspace.net.au/ very funky shop in Fitzroy, Melbourne Hope this gives you some inspiration! Building NBG Buckingham 320E Eastern Suburbs Melbourne Knockdown & rebuild Build startup 28th October 2010 http://buckingham320e-the4ofus.blogspot.com/ Not sure if that works? I was told the issue is the headspace clearance requirement on step 4. My builder is proposing shifting the beam 310mm towards the kitchen...I'm… 2 2929 To me, that's what it looks like: poor backfilling and/or compaction. The width is about 1000mm maybe. That conduit in the photo is for the NBN. The water is about… 4 8512 |