Browse Forums Lighting + Lighting Design Re: Stairwell lighting suggestions ? 13Sep 04, 2009 3:18 pm Hi , yes these will work in plasterboard ,the outer cover is so they can be surface mounted and if you wish to recess mount them just push out the centre part ( the bit with the led in lt ) and take the outer cover off the wire and then push into a 25.4 mm hole ( or 1x Inch in the old lingo ) Perfect for stairs . Do you like the price ?? See not all led`s are expensive . Rgds Greg What? It's a lighting question, the control joint is only needed at 12m centres, a bulkhead or change of direction will suffice as a 'break' in the ceiling, just make… 8 8587 Building Standards; Getting It Right! 1. optional, you can but normally just use the earth from the main switch board 2. should be enough but the distance determines voltage drop - sparky should work it… 1 28820 I have a really long hallway which is 1100mm W x 11500mm L I would appreciate if anyone can give suggestions to light it up with Linear LED lights that goes from wall to… 0 8822 |