Browse Forums Lighting + Lighting Design 1 Apr 08, 2009 10:27 am Hi All, i'm just getting to lights in our O/B shack, i'm a very senior in age member of forum & can help others on most structural matters, but my wifes requirements for new look lighting has me floundering! after i said no "little d/lites" she has come home with details of a larger looking Nelson CF 240V D/lite $24.50 + GST which appears to be bit bigger than 120mm opening. the lite chap said these r now the lights - had a pallet of them on the floor for sale. we live in a rural area so i'll go in & have a look today, but if anyone has used these can u please tell me what area they will light off a 2.7 ceiling. the room we would use them in is a family room 7.5 x7.6, with flat ceiling out 1.500m from wall then rises to a cathederal ceiling - i would put them on the outter edge of the flat ceiling just b4 it rises to the cathederal.( sorry can't print plan or pics, i'net too slow out here) we also will have 3 spot lites in the room for lighting specific features. i looked up a few sites & recon that each lite may do 9 sqm so i thought 6 might give reasonanble lite - but i'm not convinced..... can anyone give me a bit of help here - thanxs tony As title suggests, looking at using the interlocking Pentablock stacked stone products to replace failing timber retaining… 0 17786 there is only 20% difference in concrete strength between 20 mpa and 25 mpa, so check with your engineer first if it fits his calculation tolerances. There are ways to… 6 18280 Wish you all the best. Once you signed the contract, they will find millions excuses to charge you. And have seen their sites unfinished for a long time. 4 24720 |