Browse Forums Lighting + Lighting Design Re: light pendant 10Jan 04, 2009 8:03 pm Hi Kikin,
maybe u can ask the builder to provide a junction box at the ceiling above the bench, then later u could ask the electrician to install the light fitting. That gives u more flexibility to the light fitting. Alternatively, u may ask the builder to include a batten holder for the same spot in the ceiling ( but maybe need to specify if it is centred or not, depending on the design of the pendant) Then after hand over, u may still use standard batten with DIY light fitting or ask the electrician to turn it useable for other light fitting ( like urs in the pic) nottie Spring is here! Hurray! Hi - thanks for your reply. Yes I think 'Ill go for whitish with very speckly bits rather than pure white something like this. PS was actually 2008 I built the… 2 11682 That was always going to be a challenge and a test of patience. Full marks to your mate. Did you discuss the wet area near the trampoline? 16 17353 It might be a bit darker in the mornings but the light is still light, so you should be getting it. Similar to what you see from your western windows 3 19978 |