A lot of the Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ , to get a Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ across it is a lot easier with a Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ .
So here is a little how to for beginners:
Find the picture you want to show on the internet. For this example i am going to use the picture from the bottom of my own website:
http://www.avdreams.com.au
-----
I start a new thread or make a new post as usual.
I type what I want to say in that box, and in the bar at the top of the box for typing your message there is a button in a rectangle that says "Img"
Once you click this you have started the process to insert a picture from somewhere else on the internet.
The next step is to ad the address that the picture is located at on the Internet. This is the trickiest part.
There are 2 ways to ad this part in.
Internet Explorer users
1/ You can simply type the address that is presented in the top bar of the website address at the top of your screen. (If this is information is not available at the top of the screen it can be obtained by right clicking the image and selecting the properties tab and copying the address: (URL)
In this case you would need to use the right click method
Mozilla and other users
2/ Right click on the photo and select "Copy image location" and right click and paste after the [img] that was inserted before
Once finished this step click the "Img" button again to complete the insertion sequence. This will add [/img] to the end of your image name.
Your line should look like this:
note: The "{" have replaced the "[" for the purpose of the example.
{img}http://members.optusnet.com.au/~rnhcork/Images/Matts%20Panoramic%203b.jpg{/img}
If you have done this right you should end up with this:
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Matt