Browse Forums Flooring & Floor Covering 1 Jun 29, 2019 12:53 pm Hi all, I want ask some advise. A couple of months back we pulled out the carpet and installed laminate flooring. With the recent rains in Perth I found the one of our windows had a leak and some water got in part of the underlay. So I pulled off the laminate and removed the wet underlay to dry and I noticed that the off cuts touching a brick wall has green/blueish mold on it. It is not just where the underlay got wet but only where the off cuts touches the exposed bricks. Any advise on to stop the mold? Would sealing it with beeswax help? Just about completed a renovation project and hit a small issue that we didn’t see We have laminate floors now where we had tiles before (turned out it was actually 2… 0 4931 DIY, Home Maintenance & Repair At a bit of a loss on this one - we're thinking the original owners never removed the protective laminate covers from their kitchen cabinets after installation and in the… 0 6330 We are doing heaps of hybrid at the moment and the cost sits between $60-65/sqm including installation. Stairs are around $90-100 each 1 4310 |