Oct 07, 2018 9:45 am
Longtime reader of this forum and first time poster.
Im renovating an old california bungalow and due to variances in in existing floor levels and finishes i need to bring the floor levles up approx 20mm in some rooms.
Iam planning on doing this by sheeting over the existing floorboards with 19mm plywood.
Just a couple of questions:
1. Am i better to screw fix or nail fix and does this need to be through the boards to the joists?
2. Do i need to run the plywood at 90 degrees to the floorboards?
3. Do i need to provide glue between the two as well.
Any advice is much appreciated.
Sign in or Join to reply to this Topic
themismScarborough Weatherboards vs James Hardie Scyon LinearScarborough Weatherboards vs James Hardie Scyon Linear
We have the same question now! Which one did you go for in the end? What swayed your decision? Thanks
cornellengineersHow to fix this sheet parts coming off from Gyprock ceiling?How to fix this sheet parts coming off from Gyprock ceiling?
Hi That looks like plasterboard tape - the paper tape placed over the…
felix_deLargeTo match existing weatherboard or juxtapose?To match existing weatherboard or juxtapose?
Hi all, Would love some opinions on our extension. We're adding an 8m extension on our 70's weatherboard cottage (existing 12m frontage) as per the photo. The current…
adjeUnderlying S classification but P due to existing dwellingUnderlying S classification but P due to existing dwelling
Hi, we are knocking down our existing house and building a 45 square home. The builder had a soil test done which had underlying S classification but due to existing…