Flooring & Floor Covering
May 13, 2018 10:14 pm
We are in the process of putting two bedrooms up in the attic and were looking for flooring options. We are avoiding carpet for obvious dust & alllergy reasons and narrowed down on engineered timber.
1) Downstairs we have hardwood jarrah structural flooring
2) to avoid dark colors upstairs, we are going with blackbutt which will be a smooth transition from jarrah
3) Looking for underlay options upstairs to reduce footfall sound, other airborne noise transmission. Have researched a bit and was thinking of dunlop or regupol acoustic underlay.
Has anyone used these and have any other suggestions. I think rubber/cork material will dampen footfall vibrations and noise better than others. Any min thickness i go with or 5mm is snough?
(I am also installing acoustic batts between the floors)
4) Lastly , downstairs hardwood flooring is on joists and causes lot of thumping /vibration noise throughout the house. Is there an easy way to fix this. Say, if i instal a rubber underlay on the existing hardwood and another flooring on top (say engineered timber). I thought it might be easier than ripping the flooring out completely.
Re: Underlay suggestions for upstairs engineered timber floo2
Oct 10, 2018 8:11 am
I will suggest one thing. My dad had problems with his floor creaking and making noises as you walked over it. He had boards put down and a noise suppressant. Took it all up again because it still made a noise. Turned out to be the nails in the joists. He went over the lot with a punch and nailed them all tight again. Now no creaking noise!
Sign in or Join to reply to this Topic
SethorEngineered vs Solid Timber FlooringEngineered vs Solid Timber Flooring
I'm torn between these two products, I'm leaning more towards solid but most flooring stores seem to push the engineered flooring more. I plan to have either choice stuck…
matt1927Laminate vs Engineered timber flooringLaminate vs Engineered timber flooring
Thanks for the tips. Unfortunately we got priced out of engineered flooring in the end and had to settle for a top end laminate instead. Although it lacks that feel…
SamkEngineered Timber - 1.5mm veneerEngineered Timber - 1.5mm veneer
The top veneer is the actual timber on the boards - - I would not personally go with 1.5mm veneer board due to it being to thin. 4mm to 6mm veneer boards are seen in most…
crazysafariQuiet Step underlay or Regupol cork underlayQuiet Step underlay or Regupol cork underlay
thank you alex. The joists and particle boards have been laid already so may not be further flexibility to add anything more. I might just go with quiet step then…