Re: Nail or Glue Quads4
Oct 25, 2007 4:51 pm
I suppose that if you are gluing or nailing the flooring to the slab or whatever it is you are laying it on, the quad shouldn't need nailing too, should it? Not sure on that one, as we have not laid our floor yet....
There are plenty of people on here that will be able to advise you though.
Re: Nail or Glue Quads8
Oct 25, 2007 11:29 pm
Agreed with the last two replies, just stick to nails only. Glue would be quite messy and you will find that the walls are not dead straight so nailing will allow you to 'pull in' the quad as needed.
I would recommend that you pre-drill all the nail holes and have a good nail punch to punch the nails down. You can putty over the nails holes and stain the putty afterwards.
If you haven't tought of about it, I found it easier to pre-stain all of the quad before installing.
Sign in or Join to reply to this Topic
haveaguinnessWindows with reveal, nail fin and shroud from ChinaWindows with reveal, nail fin and shroud from China
HI Cheney - My email is firstname.lastname@example.org Thank you
NSUFloor tiling- Glue or sand and cementFloor tiling- Glue or sand and cement
Hello Just wondering what is the best option these days with regards to floor tiles eg 600x600mm. Level and glue or sand and cement? Which method likely to have less…