hi everyone,
we are currently trying to sort out the aggregates and colour for our flooring. the look we are going for is a darker colour with a white aggregate.
So you know on the roads you see the recycled glass (?) and you notice it sparkling on a sunny day. we would also like that sort of look mixed in.
Does anyone have any experience with this - what to use etc or know anyone who can do this? The company we are talking to are having trouble getting the samples right and the glass is just comming through.
thanks in advance...
jason
WatchingStarredHistory
MembersPros
Browse Forums Flooring & Floor Covering Re: polished concrete with a sparkle 2May 24, 2010 3:35 pm We're getting our flooring done by Homeshield Coatings, we're not getting quite the same as what you're talking about, but we've opted for the "shimmer finish" they offer, which has sort of a metallic finish to it, so if you can imagine it kind of shimmers and glints in the sun too. But its not chunky bits of glitter, if you know what I mean? Not sure if this helps you any. I'm not sure where you are based, but if you're in WA they may be worth chatting to. Website is www.homeshieldcoatings.com.au Good luck! McBecks "Too much of anything is bad, but too much Champagne is just right." Building With New Generation Homes The Domain Vertu Estate, Harrisdale viewtopic.php?f=31&t=24884 - My building thread Roof is on! Plastering has commenced... As most others have posted above the install isn't compliant. The pipe is meant to be covered in loose soil or sand, the pipe has holes in it that leaks out a termicide… 10 22255  Do you have solar on the roof, because if its not a laying defect it looks almost like someone has been walking all over the roof in the mid section of the tile (weakest… 2 8735 DIY, Home Maintenance & Repair Are you doing this with a building permit? Conversion of a non habitable room into a habitable room requires building permit. 3 28104  |
