Browse Forums Flooring & Floor Covering 1 Nov 08, 2021 7:53 pm Hey everyone. So years ago I put a floating floor down in one room of my unit. Now I have decided I want to tile it before I sell. The problem is when I put the floor down I put plywood down underneath which I used liquid nails on to glue to the concrete underneath. I realize now that was a big mistake but didn't know any better at the time. The question now is how will I get the plywood up so I can tile without doing any damage to the concrete underneath. Is this possible? Appreciate your thoughts. Thanks. I had an old shower unit that broke on me and when I took it off, there were only 2 water pipes, instead of the normal 2 water pipes and a shower head pipe. S o I… 0 34216 CDC Housing Code 3 When to apply Floor Area external face of wall vs Gross Floor Area internal face of wall. Reading thru CDC Housing Code 3, lets take a lot 915sqm.… 0 11673 isn't a garage level with the rest of the house a given? pretty sure they 'came around' long time ago. if you have a flat block, the garage is usually level with the rest… 1 13364 |