Browse Forums Flooring & Floor Covering Re: I work in flooring - do you have a flooring question? 982Feb 26, 2024 5:43 am Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: I work in flooring - do you have a flooring question? 983Feb 26, 2024 5:29 pm Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: I work in flooring - do you have a flooring question? 985May 27, 2024 6:09 pm Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: I work in flooring - do you have a flooring question? 986May 27, 2024 9:39 pm Hi Michelle The two hybrid options I've been given as follows: 1. Terra Mater Eternity Range. Spotted Gum. Type: Hybrid/Rigid Core. Wear Layer 0.5mm. Composition: Virgin PVC/Stone. Integrated high density underlay. 2. Castleton Range. Spotted Gum. Type: Hybrid/SPC Core. Wear Layer 0.55mm. Composition: SPC. Base: 1mm High Density Foam Dunlop underlay. Hope this makes sense to you. Cheers. Carmel Re: I work in flooring - do you have a flooring question? 987May 28, 2024 6:33 am Jaspersmum Hi Michelle The two hybrid options I've been given as follows: 1. Terra Mater Eternity Range. Spotted Gum. Type: Hybrid/Rigid Core. Wear Layer 0.5mm. Composition: Virgin PVC/Stone. Integrated high density underlay. 2. Castleton Range. Spotted Gum. Type: Hybrid/SPC Core. Wear Layer 0.55mm. Composition: SPC. Base: 1mm High Density Foam Dunlop underlay. Hope this makes sense to you. Cheers. Carmel Hi Carmel, I've been told by one company they can lay Masonite boards onto the slab to lift it to the level of the tiles, then lay the VPL over the top but this method would void warranty. - This is correct. BUT, I would ring the manufacture and check on that voiding of warranty! I can't see how that would void. The other company has advised that the terracotta tiles will have to be removed, the whole slab area ground, leveller applied then the VPL's laid. - This in my opinion is the best way to approach a floor. Start new. BUT the hybrids have been designed to go OVER tiles. So this one is confusing as well. Ring both manufactures and ask these questions. Best to hear it from them. Good luck Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Thanks mate. Yeah good points! Leaning towards Option 3 to get a bit extra space in the cabinets but not going too crazy high (and expensive). Would require a mini… 13 42305 I posted the floorplan on Houzz.com forum and got some really good ideas and advice from people there. Then we reached out to a couple of renovation companies and one… 5 11304 1) I had requested R6 ceiling insualtion batts, however I noticed that on some areas there are huge gaps which will allow hot air to sweep in, and also noticed black/grey… 0 5238 |