Browse Forums Pools & Spas 1 Jan 11, 2015 8:06 pm Hi All, We are building a home at Georges Fair and would like to know if anyone has any suggestions for a cheap pool? We are not fussed on semi unground, fibreglass etc. Can anyone tell me their pool builder, Pool type and the cost?? Thank you all so much in advance! Kelly Re: Cheap Pool Options needed 2Jan 26, 2015 8:51 pm We had our plunge fibreglass pool 5m x 2.5m installed by A.B.S. Alma Building Services in Melbourne. Jorge is an installer and supplier of Miami Pools who are located in Sydney but install pools anywhere in Australia. We are absolutely thrilled with the workmanship provided by A.B.S and the quality of the pool. It cost us approx $26,000 including permits, pool equipment and gas heating. You will need to allow extra money for paving around the pool and fencing. I hope this helps! 1. Roof cleaning and paint - which colour do you recommend? I often see black/ dark grey in use these days but I would prefer… 0 8313 Standard uninsulated double brick has an R value of around 0.7. An insulated standard 90mm stud timber frame can have an R value of around 2.7. Even if you insulate a… 17 12002 Hi there, I'm a conplete newbie to this, but I'm looking to put a floor down in my 6x9m shed. It's currently sitting on a 100mm thick concrete perimeter (dirt floor… 0 6454 |