Browse Forums Pools & Spas Re: Don't Buy O Ring for Waterco Water King Tablet Feeder 3May 16, 2014 7:25 pm Build thread: viewtopic.php?f=31&t=65085 Re: Don't Buy O Ring for Waterco Water King Tablet Feeder 5Mar 27, 2019 10:01 am vegas777 My Waterco Water King Chlorinator (Tablet Feeder) - the type that hold the tablets and adds the chlorine as the water flows through the body of the Chlorinator. I have had mine for several years and the O-Ring (125mm x 6 mm) that fits inside the lid was stretched and started to leak. Off to the Pool shop I went only to learn the part (number 64100) would cost $63!! A totally new Chlorinator would cost $130. This is without a doubt a total rip off. I hunted on the internet and couldn't find and cheaper price. I did some leg work and found a company SEAL IMPORTS 11 Iris Place Acacia Ridge Brisbane (07 37114004) has the exact same sized and superior quality O-Ring (higher properties) for $15.85. The part number is MR125X6 (125mm x 6 mm) N70 O Ring. There are probably other companies that have the same part. I'm not advertising for Seal Imports - suggest phoning and using the reference numbers above.. I like the Waterco product - but when they have ridiculous prices such as this - they need to learn That they can't blindly rip people off. Good Luck thank you so much for the tip, I have ordered 5 rubber over a period of time just because of your tip. Saved me a lot of money. The 125x5 is a little too thick so I have now ordered 125x4 and 125x3 hoping one of them will fit. Hi Minho I have heaps of experience in Ku-ring-gai with both DAs and CDC ( this is the main area we build in). DA's are taking 12-18months and CDC's we have been doing… 1 2178 I would never build with Fowler homes. I built with them in 2021 and till date maintenance issues are pending. All their existing trades and businesses don't work with… 14 73691 1 1030 |