Browse Forums Pools & Spas 1 Dec 26, 2012 5:09 pm Hi I have the Aquagen 3 solar heater and it is giving a faulty reading for the pool temp ie 57 degrees and therefore is not heating as it thinks it is at limit! I have primed the pump (which needed doing) and turned it on and off. The sensor is plugged into the uniot but that is all I have done. Any ideas on how to fix this would be most appreciated! Many thanks Karen 2 4365 Thanks Chippy The fridge and freezer both still work but they only cool to 15c and 10c respectively instead of the normal 2c and -15c. The compressor runs for 30 seconds… 2 4009 Okay sorry silly me, my wife has solves the mystery for me. It’s because the labels on the ports are all wrongly positioned by the builder hence it confuses me. 2 900 |