Browse Forums Pools & Spas 1 Dec 26, 2012 4:09 pm Hi I have the Aquagen 3 solar heater and it is giving a faulty reading for the pool temp ie 57 degrees and therefore is not heating as it thinks it is at limit! I have primed the pump (which needed doing) and turned it on and off. The sensor is plugged into the uniot but that is all I have done. Any ideas on how to fix this would be most appreciated! Many thanks Karen I had a similar issue with my fridge not too long ago. It wasn't the same model, but the symptoms were pretty much the same: the compressor would start and then stop… 3 7551 Okay sorry silly me, my wife has solves the mystery for me. It’s because the labels on the ports are all wrongly positioned by the builder hence it confuses me. 2 1386 I had an old shower unit that broke on me and when I took it off, there were only 2 water pipes, instead of the normal 2 water pipes and a shower head pipe. S o I… 0 36944 |