Browse Forums Pools & Spas Re: Distance required for pool 29Jan 27, 2011 8:12 pm http://take2-customdesigndownslope.blogspot.com 07-10-09 omg they have cut the block 14-05-10 we finally have the keys Re: Distance required for pool 31Jan 29, 2011 8:00 pm The NSW regulation is here http://www.austlii.edu.au/au/legis/nsw/ ... pr2008283/ Basically, apart from a minor issue on separation from the house, it specifies the Australian Standard Queensland also specified the Australian Standard which means the regs are basically the same. The below link is from QLD gov and is much better than I could find for NSW http://www.dip.qld.gov.au/resources/gui ... elines.pdf Found the answer. The recommended distance is .... 1 5958 I know foam has been around since the 90's and CSR started manufacturing Hebel in 1989, so it's definitely possible 5 5423 Minimum overhang into gutter must be 50mm, turn down tool should not split the sheet. it seems wrong tool for the profile was used, the flashing cannot slope back. Rib… 2 2092 |