Browse Forums Interior Decorating Lounge 1 Sep 12, 2011 11:41 am Hi All, I have been tirelessly looking around for Qtr strength Dune render front facade photos. Please does anyone have a qtr strength dune render pics. Click here to visit Our Blog PM email id for invites to our blog Building at The Ponds!!! Moving in 2012! Re: Help Please........ Quarter Strength dune 3Sep 16, 2011 6:24 pm 1/4 would be not to fare off from white, are you sure you want to do that? Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: Help Please........ Quarter Strength dune 4Sep 16, 2011 7:05 pm We were going to go half strength dune and I was convinced by this forum to go full strength and am so glad I did. It's really not a dark colour and I think 1/4 strength would be hardly noticeable. Re: Help Please........ Quarter Strength dune 5Oct 07, 2011 1:28 pm hi all thanks for the update. we have found the colour and have a pic too its on our blog. 1/4 strength rizo right it is hardly noticable as dune , perfect if you don't want a beige or pinky look to a lighter render colour. Click here to visit Our Blog PM email id for invites to our blog Building at The Ponds!!! Moving in 2012! Thankyou so much 😀 I've decided on White on white for doors and trims, White on white 50% on ceiling and Mt buller for walls. Fingers crossed it will look OK 😀 2 7158 i had the my concreters concrete right up to the fence. I have pits all along my path, so the water tends to drain away from the house and into the pits. There's only one… 7 12773 All 3 items listed are defects and are of concern. Please seek qualified independent inspector and/or legal advice for your state. 1 8219 |