Browse Forums Interior Decorating Lounge Re: Help about facade colours 2Aug 18, 2011 7:54 pm Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: Help about facade colours 3Aug 18, 2011 8:52 pm Michelle Jasper will work well at the back of your house with your chosen bricks. On the front you really only have 2 windows that are on a light colour the rest are on darker colours so Jasper will work there as well. So for the 2 lighter windows I see no reason to change all the window colours for just these 2 windows, it just means that those 2 windows will be highlighted. Which is not a bad thing. Looking at the pic above, I think you have done a good job. So my advice is to keep the Jasper windows. Michelle, Thanks for the helpful hints. I was only concerned about the Jasper looking a bit greenish in between the brownish timber, but I reckon, in the bigger picture, it should blend in. In place of the timber, I may also opt for the Scyon Matrix cladding or some other cladding which I may paint with other colour which may complement the Jasper and the render Paint colour. Apart from the two windows on the front, there are few other windows on the Northern elevation which are on lighter colour, Jasper will contrasting effect at that place. As suggested by you, I hope Jasper will blend nice with the brick colours at the back. Cheers Sanjeev Apart from the I'd get the gutters to match your roof and pipes to match the paint - otherwise they become a feature. Nice pick with the paint colours! 1 34239 Thank you @. Tried to play with the facade models but the exact colour is not matching up. 2 3210 Dear Members I have to decide the Facade column size. My custom builder standard is 350mm with rendering, but i asked for 470mm plus stone or tiles and yet to get… 0 7405 |