Browse Forums Renovation + Home Improvement 1 Jul 26, 2020 4:37 pm Hi everyone, I'm trying to paint a room and it has these lines where drawers were previously installed and upon removing them, it left these lines. So, I'm not sure if sanding will help out with blending these lines into the wall or is there another easier way to deal with this? Thanks Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: How would you blend these previous hard paint lines? 2Jul 26, 2020 5:41 pm Fill along the edges and then sand it. You'll have to then undercoat all the filled areas before painting everything. Accessible Carpentry & Cabinets accessiblecarpentry@gmail.com accessiblecarpentry.com.au https://www.facebook.com/pages/Accessible-Carpentry-Cabinets/583314911709039 Re: How would you blend these previous hard paint lines? 3Jul 26, 2020 5:55 pm chippy Fill along the edges and then sand it. You'll have to then undercoat all the filled areas before painting everything. Awesome, thanks for the advice mate, appreciate it! 👍 Hi It came to my attention after the handover that - The facade cladding on the face and the side are not straight. -The face tapers down by 50mm from left to right and… 0 888 Evening, Had my 3 month maintance done on my new place. Most things are fixed to ok standards, but im not sure about the visible joins in my plaster wall. There was 2… 0 4605 5 7295 |