Dec 22, 2018 4:08 pm
I've almost finished my deck!!!
I have a quick question though.... I'm using 200mm by 50mm by 2.4 metre sleepers for the deck instead or traditional decking. At the moment I'm screwing it down at each end plus in the middle, but I do have joists in between the middle and the ends. Do I need to screw the sleepers onto those joists too? I would prefer not to, but I'll do it if it's the better thing to do.
Re: Question regarding screwing down deck2
Jan 24, 2019 11:03 pm
just to be clear You're using 200x50 sleepers as decking timber that youre going to walk on? Instead of like normal decking timber? Why might i ask.
What are the sleepers? Just standard treated pine?
It doesnt sound like theyll move but treated pine is pretty 'wet' and subject ot bowing and twisting. Added screws will stop that.
What screws are you using? Have you got photos of your job?
Re: Question regarding screwing down deck3
Mar 28, 2019 5:05 pm
Great choice, we have used sleepers for decking on a few projects, and about to do another. Looks the bomb, really does. You wont need to screw down any more than you have if you have gone hardwood. If you have used pine you may find they will warp, and you will want to still put 2 screws per joist as they will cup - yes, 50mm thick will still cup!
good luck and dont forget to post some photos!
Sign in or Join to reply to this Topic
Eco BuilderWooden boards screwing standardsWooden boards screwing standards
The information the landscaper has given you is incorrect. Australian Standards stipulate 2 screws per board/joist Ideally you should be staggering the fixings as well -…
tjcHow much did your deck cost? (Deck budget advice needed!)How much did your deck cost? (Deck budget advice needed!)
I would be interested to see if you have received additional quotes. im northern beaches and budget about $30K. I have had one written quote $10k labour only, and one all…