Renovation + Home Improvement
Nov 14, 2018 7:49 pm
Would love some opinions on our extension. We're adding an 8m extension on our 70's weatherboard cottage (existing 12m frontage) as per the photo. The current cladding is hardwood weatherboard in reasonable condition. The western end, where the extension is going, will be getting stripped as it will be the new internal wall to the new adjoining extension, however after stripping the rear of the building for a previous project, I know I'll lose 20% of the boards at least during the demo making the possibility of reusing them on the front a no go (plus I'd be short more than likely anyway).
So that leaves me with the problem of what do I do with the front of the extension??? The back and new western end I'm not super fussed on since they won't be seen much.
Options (I've come up with so far):
Try and match the existing profile with an FC product - issues being will it still stand out? plus most have that plastic joiner which is quite ugly.
Go a completely different product (and colour???) to juxtapose the weatherboard... but what combo I have no idea!
Find a mill that can do a run of new hardwood boards - issue being cost I imagine!! Plus it's an awkward profile I think.
Strip the front of the existing cottage and reclad the whole lot with whatever product - issue being cost.
Since we're adding 2/3 to the frontage to the property we need to get this right as it'll stand out like the preverbal if we don't.
Any help/opinions would be much appreciated! I have the same issue with the roof colour!
Sign in or Join to reply to this Topic
ThylaceneBuilding with weatherboard (or alternative) - AdelaideBuilding with weatherboard (or alternative) - Adelaide
A different perspective on fc cladding, I am using cemintel territory on our build. Concealed fixings, preformed corners, and no painting (pre-finished panels). It's a…
MelbournevicDo bedroom door styles and closet doors need to match?Do bedroom door styles and closet doors need to match?
Thanks. Yes we are doing the same as what you did in your new house. 4 panel doors for all bedrooms, WIR and ensuite doors. Then just flat doors for robe and linen…
callmealJoining new house to existing granny flatJoining new house to existing granny flat
So... not sure if this is a really stupid idea, but we need to upsize and build a house, but are hoping to join it to our existing (currently separate) granny flat to make…