Renovation + Home Improvement
Oct 20, 2018 9:00 am
Can any one please advise what should I do .
My painter filled all around my cable ends with expandable foam and now my roof cannot breath.
Do I try to cut out the foam from the corners on the front and back of my house?
Do I put in whirly birds on the roof?
Please could someone advise as what I should do, as I feel that the expandable foam would have creep behind the cable board and it will be extremely hard to remove.
Sign in or Join to reply to this Topic
dbennoWill ply stain concrete if left out in the weatherWill ply stain concrete if left out in the weather
We are polishing our concrete slab, (semi exposed) However I want to protect the floors whilst the chippies put the frames up, so I purchased 4mm ply to lay underfoot,…
Eco BuilderWooden boards screwing standardsWooden boards screwing standards
The information the landscaper has given you is incorrect. Australian Standards stipulate 2 screws per board/joist Ideally you should be staggering the fixings as well -…
wil4katSkirting boards pulling away from tiles and wallSkirting boards pulling away from tiles and wall
I have and they have come to view it but haven't come back to me with how it is to be rectified. They are very slow to respond to calls or emails and often just ignore…
building-expertSkirting boards pulling away from wall and floor tilesSkirting boards pulling away from wall and floor tiles
You need to engage a very experienced building consultant to assess what is happening with your home and to do forensic on whether the builder has followed approved drawings.