Browse Forums Renovation + Home Improvement 1 Mar 31, 2019 9:50 pm Hi, I have a large Stratco-type shed in the backyard that is colour-bond clad, 7M x 12M. The colour-bond is looking a bit dated. My thought is to use blue-board and render using the Dulux colour render product. My question is, do I remove the colour-bond sheets and replace with blue-board by screwing the board to the frame? Or do I clad the colour-bond with blue-board, and if so, how do I fix it to the colour-bond sheeting? Any suggestions? and has anyone done this before? Thanks and regards, David. Re: How to render a backyard man shed? 3May 15, 2019 9:19 pm There are many approaches to building a man cave in the backyard. You can opt to convert an existing outbuilding or build a new one from scratch. However you must call a professional to ask about it! Thanks. Yeh ideally that would have been good, but have progressed too far now. Hoping some well placed internal walls fixed up into the battens will provide some… 2 5610 Hi, I am sheeting the inside of a 5.7 x 8m shed with gyprock. Unfortunately the shed wasn't designed for internal cladding but I have been framing it up as strongly as… 0 3555 DIY, Home Maintenance & Repair I'm in WA and our sandy soils make drainage a bit easier but this is what I'd be doing. Dig down to your footings and let the wall dry out. Clean it all well by brushing… 1 5370 |