Browse Forums Renovation + Home Improvement 1 Dec 21, 2017 5:25 pm Hi all, my first post and hope this makes sense along with the diagram prepared to help aid my description. The space I have upstairs is very small and I am unable to fit a desk or small table. My job and question is to use a very light weight table top and attach it to the interior balcony using a device like a drawer slider or some mechanism as shown in the diagram resting vertically in position 1 and using using this mechanism to lift or slide up the light weight table top (red arrow in diagram) and flip over to a horizontal position as shown in position 2. The idea would be to have the light weight table top rest on the balcony as a temporary table. Than return the table from position 2 in the diagram back to vertical position 1. I would be highly appreciative for advice on a mechanistic device that I could use to lift up and flip over the table top. Regards Sam Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Hi, Really struggling to find some consistency amongst Span Tables, can anyone help… 0 1493 If there have been changes, variations, during construction then the drawings should be revised, the building permit amended and the current, as built drawings given to… 2 2729 Building Standards; Getting It Right! These can be easily filled and repaired and it doesn't cost them much to do. Id get the builder to do this first and if the repair is not suitable then a replacement is… 12 29207 |