Browse Forums Renovation + Home Improvement 1 Mar 13, 2017 7:43 pm Hi all I have an old brick and tile house, 1940s, and in the original part of home the walls have a textured paint finish to them - see below Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ I would like to smooth out these walls and then paint - and i am just wondering what the best/least messy way to do this is... can i get away with plastering over the top or do i have to sand it all back to make it level? hoping someone has done something similar and can point me in the right direction. Thanks I would probably render it and then paint it as per your other advice, or gyrpock over the top. 1 3321 4 9048 Yeah mine about 9 metres long and 8 wide with slope of 25% at one point but the end point of the outlet is past the side of garage and if he concretes allowing for… 4 4517 |