Browse Forums Renovation + Home Improvement 1 May 01, 2016 4:39 pm I have a self-supporting outdoor deck (enclosed with roof) I want to resurface with cement sheets and then tile. The deck bearers are supported by brick posts. Is it best to leave a small gap between the new deck and the wall of the house to avoid rot, or is it better to use flashing and have the cement sheets butt against the wall? 2 7437 Hi guys, I want to do some floor levelling before laying the planks and am considering doing it with self-levelling or yellow tongue PB board. I am wondering which one… 0 6510 DIY, Home Maintenance & Repair I'm in WA and our sandy soils make drainage a bit easier but this is what I'd be doing. Dig down to your footings and let the wall dry out. Clean it all well by brushing… 1 5156 |