Browse Forums Renovation + Home Improvement 1 Aug 27, 2012 9:45 pm And it all looks good. But I used this stuff: FJ Clear Laminated Pine Panel http://www.bunnings.com.au/products_pro ... _5369.aspx To fill the gap around the panel I used this stuff: Selleys PROSERIES™ Adhesive Sealant http://www.selleys.com.au/trade/buildin ... ve-sealant Everything I read (AFTER putting it in) screamed "Don't use pine for an external wall!" Of course, that got me terrified so I've put three coats of this on it: DULUX 1 Step Acrylic Primer, Sealer & Undercoat http://www.dulux.com.au/products/dulux- ... oduct=2178 Will this be OK? It's the bottom floor of a two storey house on a RELATIVELY sheltered wall (by the neighbours house). In north Queensland by the way. Anything else I should be doing? Realistically, I can't remove it now. How should I monitor it? Thanks for the help! it depends on the natural ground level, if they excavated their boundary wall needed to be built as a retaining wall. If you filled, which sounds like the case then you… 1 7084 I know foam has been around since the 90's and CSR started manufacturing Hebel in 1989, so it's definitely possible 5 5447 Building Standards; Getting It Right! Hi, sorry if this is the wrong place - I’m new to the property/building journey (trying to buy my first home) so not sure where/who to go with these sorts of… 0 19156 |