Hi there,
We are currently building a veranda off the side of an existing Olympic shed.
Does anyone have experience with fixing through corrugated wall sheets.
I am worried that the corrugations may collapse as we tighten the bolts.
We're hoping not to have to cut the sheets to avoid losing thermal properties. Shed is fully lined with Glareshield insulation.
Any help would be greatly appreciated. Thanks!
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
WatchingStarredHistory
MembersPros
Browse Forums Renovation + Home Improvement Hey guys I'm a carpenter and mainly do fix outs on steel frame homes I generally have to screw all my architraves/skirts etc.I have seen these new Paslode nails design for… 0 15494 Thanks for much mate. I see that you do cabinets before flooring. For timber flooring, for most parts it's fine because it's got base plates, and for door jabs you can… 7 41450 Good day, My house is at the almost lowest point in the area, with two street sides - South and East. Dimension of the land is approx 28m*17m. In the diagram, the black… 0 25187 |
