Hi Guys, I hope someone who has done this can advise, because if I get it wrong , it will be a huge pain to fix......
I am replacing the stirrups on my verandah of my home and I want to make sure the repair will not break away from the existing concrete.
Does anyone know of a process or product I need to do/use to make that so?
I have only a little experience with 'Boncrete' but I am not sure it would work in this application.
I have fitted M8 x 75 anchor bolts to the insides, hoping that will help, but I have no idea if it will do anyhting...
Entering 'Concrete Repair into the Bunnings webpage yields these results:
https://www.bunnings.com.au/search/prod ... BoostOrder
Should I be using something like : Sika 20kg General Purpose Grout Repair?. or the more expensive offering?
Thanks for any insite.
Steve
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
WatchingStarredHistory
MembersPros
Browse Forums Renovation + Home Improvement Re: How to Ensure Concrete Repair stays attached to old conc 2Oct 04, 2023 5:16 pm Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog  04 Oct 2023 3 New Poster Re: How to Ensure Concrete Repair stays attached to old conc 3Oct 04, 2023 6:08 pm  building-expertYou will need to drill and insert dowell bars, grouted into hole with epoxy. Prior to concreting use Bondcrete for chemical bond Thanks. I have put 2 drive bolts in each location. How do I apply the Bondcrete? Paint it on the exposed edges before I pour the repair in? Do I need to let it dry before pouring? Steve Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: How to Ensure Concrete Repair stays attached to old conc 4Oct 04, 2023 6:18 pm  sterob building-expertYou will need to drill and insert dowell bars, grouted into hole with epoxy. Prior to concreting use Bondcrete for chemical bond Thanks. I have put 2 drive bolts in each location. How do I apply the Bondcrete? Paint it on the exposed edges before I pour the repair in? Do I need to let it dry before pouring? Steve Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Yes brush it on, read Bondcrete instructions Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Hi there, looking to have a gym in a new build. Planning to install some sort of rubber mat flooring (on concrete) i.e. Asking the builder to not do floorboards in the gym… 0 3887  Hi, I'll be starting on my verandah repair soon - replace ledger, rafters, roofing iron, flashing etc. (fascia board already done). My question is about the timber ledger… 0 5124 DIY, Home Maintenance & Repair The intent of that sort of clause is being misaaplied. its suposed to be used to avoid paying out for things liek when you decided to do a reno yourself and the… 3 7472 |
