Browse Forums Renovation + Home Improvement Re: Restoring Correct Finish to a Patched Interior Brick Wal 6Oct 22, 2020 9:47 am Stewie D You didn't say it was a screw hole! Just use the builders bog and go over it a few times to get the surface flush. paint the whole wall a couple of times and if you've done a good job of the patch you shouldn't be able to notice it. Stewie Sorry! I was asking in a more general sense as I do have larger holes to fill as well so your advice will be put to good use. We'll paint over it a few times with the roller and hopefully it comes out looking good. Cheers Thanks Chippy,I do have one that I levered out. I'll try to find a brand name on the windows then do some searching. Here is a photo where you can see how worn they are. 2 6297 I am looking for someone who might have tackled a similar issue as me. I have a few rendered interior walls, the surface condition is hardly flat. I can see all the bumps… 0 5741 Hi Would love some advice on a DIY project I've dived into that's now keeping me up at night. We've got a cool 1970's Mid Century style house here in NZ and have always… 0 1309 |