Browse Forums Owner Builder Forum Re: Cost of Shell? 2Mar 14, 2019 12:45 pm Rayan1910 You will need to establish an overall design,budget, work out the materials, quants and apply realistic rates for the trade components. Don't be too fussy at the preliminary stage 1, as you fill in the details and firm up quotes try to stay within the defined boundaries, Generally it should take several iterations ie 1. 2D Sketch-> rough quants 2. Construction/Engineering 3D Drawings/Details->accurate quants 2- Storey, Masonry, Timber Frame, Truss Beam Slab Details 3. Trade Estimate/Quote & check feedback into 2 above Getting the Best Info, Data and use from a site/project Goodluck Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs Alternatively, you can sign a contract with pre-defined known amount you pay to the builder for management and warranties and then you just pay the invoices their provide… 2 5249 Hi Marko The best thing to do is to have a look at your contract and see how the variation clause is worded. We use the NSW Fair trading contract and the way that is… 1 5059 |